After the tragic and unexplained death of VoIP32v2, a few changes were made to the PCB and another attempt was made to bring this project into the land of the living.

So far, I am pleased to report success!

As I write this, an interrupt-driven LCD driver is in place, the FAT12/16/32 file system library works splendidly, and the microcontroller is able to program the CPLD with a bitstream it pulls from the SD card.  The TCP/IP stack compiles into the project, though no attempt has yet been made to run its code.

I hope to write the low-level Ethernet functions soon, bringing network connectivity to the board.  Until then, be sure to check out the github repository for progress on the project.