Introduction:

Ah, Halloween. Next to Ramahanaquwanzmas, one’s birthday, and a handful of other possible days, is there a better day of the year? Not only is it socially acceptable in this small time window to walk around in public dressed up as a robot, vampire, etc., but if you’re maker-savvy you get to build something fun! I enjoy Halloween a great deal, and have gone to some pretty impressive lengths in years past to get a kick out of the holiday, and this year would be no exception!

I’ve always had a thing for Iron Man. He’s often hailed as the engineering superhero, and any super hero that can be seen on the big screen holding a soldering iron is grade-A material in my book. With this in mind, I set out to build an arc reactor, like the one seen in Iron Man.
(continue reading…)

Another year down! On this day 2 years ago, George Hadley and Ben Laskowski set out to create NBitWonder, a website which could serve as an online platform for displaying their projects. In the time since then, we’ve made tremendous strides in our efforts to create one of the best open source hardware communities on the web. Below we highlight some of the major advancements that came about in NBitWonder’s 2nd year:

Documentation and Sharing:

Unless you have good documentation, and share your efforts in an easily accessible way, an open source project is little more than show and tell. Year 2 saw significant progress in our ability to share our work. We joined github, and actively maintain git repositories for all of our projects there. We explored what it was to have good documentation on projects, then proceeded to follow through, setting up a modular, versatile directory structure and open source documentation templates, first in LaTeX and later in OpenOffice to detail our projects as thoroughly as possible.

Website Improvements:

Year 2 saw the addition of many new features to the NBitWonder online platform. We joined flickr and began sharing many more photos of our work with the world. January saw an attempt to push the website to NBitWonder v2.0, and while that wasn’t a complete success it saw the addition of the NBitWonder forums and wiki. Near the end of year 2, we even opened a small, provisional NBitWonder store, to begin selling some of the things that we made.

New Projects and Capabilities:

Year 2 of NBitWonder’s existence saw several new NBitWonder original projects, including the Class-D audio amplifier, DC Motor Driver, and our brand new software-defined radio (SDR) project. In addition, a RepRap Mendel was successfully constructed and some homebrew circuit boards and art were constructed, adding 3D-printing and circuit board etching to NBitWonder’s list of capabilities.

NBitWonder Members and Staff:

Year 2 saw a number of important changes in the lives of the NBitWonder staff. Chief Technical Officer Ben Laskowski graduated from Purdue, as did our IT liaison Sam Mussmann. They stayed on as NBitWonder members, and in addition we brought Rob Swanson on board as a guest blogger to help write about interesting issues in the realm of open source hardware and hobby electronics.

Maker Faire:

Year 2 saw NBitWonder’s first participation in Maker Faires across the United States. We debuted at Maker Faire North Carolina and continued our exploits at Maker Faire Indianapolis and Maker Faire Fort Wayne. We had a wonderful time at these events and met many new and interesting people.

Looking Forward:

NBitWonder has come a long way in the past year, and the look ahead is every bit as exciting and interesting. Expect to see new projects, commercial products, and valuable research in the year ahead. Come check us out, we’ll be here!

This is the 14th post in a series detailing my efforts to construct a RepRap Mendel, an open source 3D printer.

Introduction:

The RepRap Mendel is a complex machine, that is quite challenging to build and calibrate. However, there’s nothing quite like the finished product, and the satisfaction of having completed one of the early generation rapid-prototyping devices makes the challenge and effort worthwhile. In total, the RepRap Mendel Build took 3 months and 14 blog posts, which are listed below for completeness:

1. Part 1: Prologue
2. Part 2: Awwww Nuts
3. Part 3: XYZ
4. Part 4: Toil and Trouble
5. Part 5: Extrudapalooza
6. Part 6: Electronics Testing
7. Part 7: I Love it When A Build Comes Together
8. Part 8: Calibration
9. Part 9: Fix It!
10. Part 10: Calibration (Part 2)
11. Part 11: Build Platform Blues
12. Part 12: Fix It! (Redux)
13. Part 13: Victory!
14. Part 14: Lessons Learned

(continue reading…)

This is the 13th post in a series detailing my efforts to construct a RepRap Mendel, an open source 3D printer. For the rest of the build series, see here.

Introduction:

Previously, I built the printer, broke the hotend (twice), tore this thing apart and retooled it a half dozen times. It was not clear if this build would ever be done. Still, the hotend was working, electronics were working, everything except the printbed was working, and I seemed closer to victory than ever before…

Heated Printbed 2: Electric Boogaloo:

The problem with the printer was fairly simple: everything worked, but the plastic would not stick to the printbed. Originally, I used an aluminum printbed covered in Kapton tape with power resistors mounted to the bottom, a heated printbed. However, when testing the original heated printbed, one of the power resistors began to boil and give off smoke, prompting me to switch to an MDF bed covered in blue painter’s tape. Further discussion and analysis revealed I had inadvertently wired one of the power resistors in parallel with the other 3 in series when I constructed the original hated heated printbed. Oops…
(continue reading…)

This is the 12th post in a series detailing my efforts to construct a RepRap Mendel, an open source 3D printer. For the rest of the build series, see here.

Introduction:

Last time, the RepRap Mendel was nearly working, with the exception that plastic was not sticking to the build platform. After attempting a variety of build platform materials and options, an astute IRC channel member noted that the heater block on my hotend was screwed all the way up the nozzle threading. As such, the plastic had a couple of centimeters and seconds to cool before reaching the printbed. In order for 3D printing to be done successfully, this issue was going to have to be resolved.

Not Again!

Last time I broke the hotend on my printer, I redesigned a bracket plate for the printer that improved the hotend mounting for my extruder considerably. As such, the hotend was considerably easier to remove this time around, and even didn’t require me to completely disassemble the X-carriage this time. Unfortunately, due to thermal expansion or a number of other possible explanations, the block was secured to the threads of the nozzle and would not budge. In attempting to unscrew the heater block, I broke one of the leads off the power resistor. Craaaaaaaap.
(continue reading…)

The blog and forums have been somewhat quiet for the last week, and some of you may have been curious what we were up to.

NBitWonder is an open source hardware website and community, with a number of projects in development, by multiple developers. When you have multiple developers, things get written and thought about in different ways. This is fantastic when tackling problems and proposing solutions, but can make things nebulous and incoherent for end users and developers interested in your project. So what do you do? Standardize!
(continue reading…)

Day 2 of Maker Faire Fort Wayne was a good time, and warmer than day 1! Day 2 featured a number of interesting attractions, and some photos of the event are shown below:

The Fort Wayne Lincoln Pavilion, where Maker Faire Fort Wayne was held.
(continue reading…)

Maker Faire Fort Wayne was a blast, and we enjoyed seeing those of you who battled the cold weather and made it to the event! It was a great opportunity to promote NBitWonder and show off some of the wonderful things we have made, as well as meet many new and interesting people. Read on for day 1 of our Maker Faire coverage: (continue reading…)

Spotted on the interwebz today is a copy of Jamis Buck’s 2011 Ruby Conference presentation, “Algorithm” is not a four-letter word. It’s a fantastic presentation for veteran coders and novices alike.

In his presentation, Jamis details what it takes to become truly good in a given field. Being good at programming, like any other field, requires dedication, practice, and exercise. To help illustrate recreational exercise for programmers, Jamis goes into an explanation of maze-generating algorithms with many examples that is sufficiently detailed without being overly rigorous. Interactive demonstrations of various algorithms are presented, many of which are truly a-maze-ing.

So, sit down and give it a read, you’ll be glad you did.

(Thanks Brandon!)

Maker Faire Fort Wayne is just days away. Are you gonna be there? We are! Last week we received a shipment of printed circuit boards, and what better thing to do with some of the extras than give them to people who stop by the NBitWonder booth at Maker Faire.

Up for grabs are four copies of our latest VoIP32 and Class-D Audio Amp projects. We’re giving away two of each each day at the Faire.

Throughout the day, we’ll be posting free pcb codes to our LED sign. If you spot one of the codes, be the first person to contact us with the code, as well as your name and address, and the board is all yours!